MIRN G2 is designed for a wide range of application areas such as engine rooms, storage rooms, passageways, hanger etc. IP66/67. Furthermore, housing is available in Navy Grey (RAL 7035) in stainless-steel material for open deck applications and in white for the Zink coated steel version for interior areas. Some of the key features include: 400g MIL shock tested - Voltage: Wide range driver that covers 115, 120 and 230VAC. It also covers 230VDC with standard driver. - Emergency battery backup with 3Hrs (EB3/S) and 24VDC Centralized emergency powered via UPS (E24) – Colours: White, Night adaptation red, NVIS Green and two colours in one linear - Available with DALI and 1-10V dimming - Available with EMC1 - Brass nickel-plated cable glands - External grounding – Lumen output: 2500lm MIR G2 ( Marine ) - Marine Certified variants also available MIR G2 (Marine) - are manufactured according to IEC 60092-306 Lumen output: 2500 - 7500lm

STIM300 is a small, tactical grade, low weight, high performance non-GPS aided Inertial Measurement Unit. It contains 3 highly accurate MEMS gyros, 3 high stability accelerometers and 3 inclinometers. The IMU is factory calibrated and compensated over its entire operating temperature range. STIM300 is a cost-effective ITAR free solution for systems that only had FOGs as an alternative when reaching for the performance level of that STIM300 can offer. Each axis is factory calibrated for bias, sensitivity and compensated for temperature effects to provide high-accuracy measurements. The unit runs off a single +5V supply and communicates via a RS422 interface. The use of a 32-bit RISC ARM microcontroller provides flexibility in the configuration, like choice of output unit, sampling frequency, LP filter -3dB frequency and RS422 bit-rate and protocol parameters. For more advanced users, STIM277H may be put in Service Mode. In this mode all the configuration parameters can be temporarily or permanently changed by overwriting the current settings in the flash memory. Service Mode also provides the ability to perform single measurements, perform diagnostics and obtain a higher detail in the status byte.

Whether you're at a fixed site, or you need timely information for your airborne, maritime, or land vehicles, get cutting-edge security from our professional staff. ISD personnel have extensive experience in military, aviation, and aircraft sensor systems integration and can provide FAA-certification where applicable.

Compact elegant, robust and ergonomic The PD140N features a special ergonomic design consisting of an offset hand grip which ensures that the operator’s hand does not interfere with the sensitive detection area. This means fewer scans per person and therefore shorter inspection times per person. Special care has gone into the mechanical design of the detector. Absence of sharp edges or corners allows the detector to be passed smoothly over the inspected area without getting caught in buttons, buckles, folds or other parts of clothing. NIJ Standard 0602.02 compliant The technical features of the detector comply with the NIJ standard 0602.02 and the new NIJ draft standard 0602.03. The PD140N has uniform sensitivity to magnetic and non-magnetic targets including those made of stainless steel. At the same time the detector offers excellent body-effect compensation and has high immunity to external disturbance from electromagnetic and mechanical sources. Full digital design The PD140N is fully digital. Electronic functions include an inspection field transmitter- receiver based on Digital Signal Processing (DSP) technology, a digital operator interface and external communications over the incorporated USB port. This design combined with a special printed antenna ensures top reliability and very high repeatability. Advanced control panel The control panel with switches and warning lights is made from high-thickness silicon guaranteeing high degree of protection to make the PD140N suitable for indoor and outdoor use. Extended continuous operation time The PD140N metal detector is powered by two AA-size NiMH batteries with a battery life of over 100 hours. A Low Power Mode is automatically activated during pauses, extending the battery life up to 200 hours. An internal circuit optimizes battery recharging which takes less than five hours. Latest plastic materials technology The metal detector casing is made from next-generation technical polymers. These plastics offer high chemical resistance and mechanical strength ensuring a long detector life even in heavy duty conditions.