The member of NAUDI Veem-Metalavtoprom supports the Ukrainian military industry. The military seats are designed in close collaboration with the military to meet the high comfort requirements in military vehicles and ships. The seats can be designed individually for the customers. Own design bureau with more than 20 years of experience is developing seats for any military equipment and adapting to different operating conditions. Two types of seats for military vehicles can be offered: - seat for the driver of an armored personnel carrier; - seat for a paratrooper (models SS-4 and SS-5). The seats can be equipped with an integrated 2-, 3-, 4- or 5-point belt, as well as adjustable armrests and headrests with lateral safety helmet support and folding footrests if more space is required in the armored vehicle. Benefits of the seats: - light and strong frame; - convenient and simple fastening; - adjustable headrests; - the cover is made of dense fabric that repels dirt and water, easy to remove.

The Dillon Aero M134D is one of the most reliable weapons in the world, given its capacity, simplicity in loading, and ease of maintenance. Designed for speed and accuracy, the M134D is a true force multiplier. The rapidity of shooting is of the utmost importance: only guns as rapid as the M134D can achieve the [...]

KROSYS has been supplying reverse osmosis (RO) desalination systems to a wide range of clients for over 40 years. In particular, KROSYS is the exclusive designated manufacturer for the Republic of Korea Navy. Numerous units have already been installed and are currently in operation on naval vessels. One of our greatest strengths is our proven track record with operational warships, which require strict special performance testing—including shock, vibration, and noise—due to their demanding operational environments. KROSYS is the only company that fully meets these requirements. All systems are designed and manufactured in-house, and our quality control is rigorously managed in accordance with the Republic of Korea Navy’s stringent standards.

ASC NL100 complete unit contains a main control with touch or foil panel for flush mounting, relay modules for lanterns connection and power supply unit for installation inside of bridge console or in technical room. It runs under a user-friendly and easy-to-use operation. An open-protocol (based on NMEA0183) offers direct remote-control-of relay modules from Integrated-Bridge-System (IBS). The ASC NL100 can handle vessel’s input power supply voltage (including main and standby) of range 100VAC-230VAC (50/60Hz) and 24VDC. Moreover, it may contain up to 14Pcs. of relay modules. The ASC NL100 monitors dual (main and standby) power supply with manual or automatic switch-over function. It continuously monitors the status of lights that are switched on and light's circuitry by checking current for each connected navigational light or All-round light. If the current drops below threshold, the alarm is activated and the system automatically switches to spare light (if exists), however this provides more safety. Each light output is protected by melting fuse or circuit breakers. All Relay modules are equipped with manual override activation features which allow operation even in case of electric failure. The ASC NL100, in maximum configuration, controls up to 64 Nav-Lights. It is tested and compatible with standard incandescent bulbs and Glamox / aqua signal LED navigation lights Series 55, 65, 60, 61, 70/70(M), 75(D), 66N(D) MIL, and 76N(D), both Standard and Arctic variants. In addition, The ASC NL100 is DNV certified. The ASC NL100 system requirements according to DNV: - Control via one or more foil panels, a Touch Panel PC or from third party systems such as IBS - Manual or automatic switch-over to spare light in case of main Navigation light malfunction - Manual override function - Only one type of relay module for all voltages - Navigation lights may be mixed incandescent or LED - Standard interface to external systems with NMEA0183 (basic) (further Modbus-TCP with PLC and Touch Panel PC). It is highly flexible and available with standard cabinet sizes (small, medium, large and custom) or as mounting plates or even single components, and setups (E.g. 8+8 (8 main and 8 standby), 16+16 (16 main and 16 standby), 16+16+16 (24 main and 24 standby), 4x16 (32 main and 32 standby), and customized circuits). - Factory pre-configured and checked to rules for customers safety - DNV certified - Flush mounted FP housing selectable in 3 standard sizes, incl. - Up to 5 FP in one system - Safe-Return-to-Port (SRtP) functionality with at least 2 FP - Alarm function optical, acoustic ASC NL100 - Control with PLC via Touch Panel PC (TP): - High class ASC NL100 with newest maritime certified PLC and up to 5 TP in one system - Highly free configurable and even free programmable GUI for standard and custom solutions - Works with all standard ASC NL100 relay modules - All settings may be fine-tuned or completely re-programmed by customers directly from the setup screen - Alarm functions optical, acoustic and log file - Flexible screen setup incl. custom solutions - Standard interface to external systems with NMEA0183 (basic)and Modbus-TCP.