Tracer is a portable UAV detector that effectively receives, analyzes, and processes radio signals from various UAV models. It can quickly pinpoint the exact location of both the UAV and its pilot by analyzing the protocol layer information of wireless signals, all without causing any interference to wireless communication devices within the protected zone.

Practical and robust lid panel with pouches, ideal for small accessories and documents. Suitable for cases 4209 and 4216. Color: black.

GE Aviation and Safran launched on June 14, 2021, a bold technology development program targeting more than 20 percent lower fuel consumption and emissions c...

ASC NL100 complete unit contains a main control with touch or foil panel for flush mounting, relay modules for lanterns connection and power supply unit for installation inside of bridge console or in technical room. It runs under a user-friendly and easy-to-use operation. An open-protocol (based on NMEA0183) offers direct remote-control-of relay modules from Integrated-Bridge-System (IBS). The ASC NL100 can handle vessel’s input power supply voltage (including main and standby) of range 100VAC-230VAC (50/60Hz) and 24VDC. Moreover, it may contain up to 14Pcs. of relay modules. The ASC NL100 monitors dual (main and standby) power supply with manual or automatic switch-over function. It continuously monitors the status of lights that are switched on and light's circuitry by checking current for each connected navigational light or All-round light. If the current drops below threshold, the alarm is activated and the system automatically switches to spare light (if exists), however this provides more safety. Each light output is protected by melting fuse or circuit breakers. All Relay modules are equipped with manual override activation features which allow operation even in case of electric failure. The ASC NL100, in maximum configuration, controls up to 64 Nav-Lights. It is tested and compatible with standard incandescent bulbs and Glamox / aqua signal LED navigation lights Series 55, 65, 60, 61, 70/70(M), 75(D), 66N(D) MIL, and 76N(D), both Standard and Arctic variants. In addition, The ASC NL100 is DNV certified. The ASC NL100 system requirements according to DNV: - Control via one or more foil panels, a Touch Panel PC or from third party systems such as IBS - Manual or automatic switch-over to spare light in case of main Navigation light malfunction - Manual override function - Only one type of relay module for all voltages - Navigation lights may be mixed incandescent or LED - Standard interface to external systems with NMEA0183 (basic) (further Modbus-TCP with PLC and Touch Panel PC). It is highly flexible and available with standard cabinet sizes (small, medium, large and custom) or as mounting plates or even single components, and setups (E.g. 8+8 (8 main and 8 standby), 16+16 (16 main and 16 standby), 16+16+16 (24 main and 24 standby), 4x16 (32 main and 32 standby), and customized circuits). - Factory pre-configured and checked to rules for customers safety - DNV certified - Flush mounted FP housing selectable in 3 standard sizes, incl. - Up to 5 FP in one system - Safe-Return-to-Port (SRtP) functionality with at least 2 FP - Alarm function optical, acoustic ASC NL100 - Control with PLC via Touch Panel PC (TP): - High class ASC NL100 with newest maritime certified PLC and up to 5 TP in one system - Highly free configurable and even free programmable GUI for standard and custom solutions - Works with all standard ASC NL100 relay modules - All settings may be fine-tuned or completely re-programmed by customers directly from the setup screen - Alarm functions optical, acoustic and log file - Flexible screen setup incl. custom solutions - Standard interface to external systems with NMEA0183 (basic)and Modbus-TCP.