Safety fences are commonly used to prevent unauthorized access, avoid accidents, or protect workers and the public from potential hazards. Overall, a Safety Fence plays a vital role in preventing accidents, protecting workers and the public, and controlling access to hazardous or restricted areas

OERLIKON REVOLVER GUN® MK3 - This remote controlled, high precision 35mm air defence gun with integrated radar tracker and electro-optical sensor unit is a powerful, autonomous shooter suitable for various kinds of missions. - The Revolver Gun Mk3 can receive and process target data from 3D or 2D search radars or higher order control systems. The tracking radar’s automatic search pattern makes target handover simple, fast and reliable. The integrated gun control computer manages target tracking and engagement. - The integrated 35mm Oerlikon Revolver Cannon® provides superior fi repower and accuracy. Combined with the Oerlikon Ahead® air burst ammunition the gun achieves a high effectiveness against a wide range of air threats, including low, slow and small (LSS) targets, UAS, artillery rockets, mortars and air-to-ground missiles. OERLIKON SKYNEX® CONTROL NODE 1 - The Skynex Control Node 1 houses the computers and operator consoles of the Skymaster Battle Management System in a 20 feet container equipped with power supply, air conditioning, protection and communication systems. - The Skynex Control Node is designed to be operated by four operators, an operations offi cer, two target operators and a technical operator. In order to increase the maximum amount of simultaneous target engagements, two more target operator consoles can be installed. OERLIKON MULTI SENSOR UNIT - The Oerlikon Multi Sensor Unit (MSU) is the next generation sensor unit for ground based air defence. It can be installed on a wide range of platforms and is equally suited for stationary or rapid deployment missions. The fully automated MSU is remotely controlled from the Oerlikon Skynex® control node or from a third party battle management system. OERLIKON X-TAR3D® TACTICAL ACQUISITION RADAR - The X-TAR3D is a three-dimensional multi-mission X-band search radar. As a light and mobile tactical acquisition radar it is ideally suited for short and very-short range air defence systems such as the Oerlikon Skynex® Air Defence System. - The X-TAR3D performs the search, detection, acquisition, tracking and identification of high and low-altitude air targets, in order to provide the Skynex Control Node with a coherent three-dimensional air picture. OERLIKON AHEAD® AIR BURST TECHNOLOGY - The Revolver Gun Mk3 and the Twin Gun GDF009 TREO both rely on the proven Oerlikon Ahead® Air Burst Technology to achieve the highest possible kill performance for small air threats and in particular for RAM threats and drones. The Ahead ammunition carries a payload of subprojectiles, which is ejected at a pre-determined distance ahead of the target, with the objective of achieving an optimal subprojectile density for maximum effectiveness. FUTURE SKYNEX EFFECTORS OERLIKON HIGH ENERGY LASER - For more than a decade, Rheinmetall has been working on new weapon technologies such as the high energy laser. Its scalable degree of escalation, the low cost per engagement and the extended engagement range make it the ideal weapon against unmanned aerial systems, in particular drones and other low, slow and small targets that come in masses. Integrated into the Skynex Air Defence System, the high energy laser certainly adds a first level of saturation resistance that is well required looking at the future threat scenarios.

APPLICATION: For fixed installation in most areas and on open deck in ships and offshore unit. MAIN CHARACTERISTICS RATED VOLTAGE: AC 0.6/1 kV ( 1.2 kV ) DC 0.9/1.5 kV ( if voltage to earth dors not exceed 0.9 kV ) MAXIMUM CONDUCTOR TEMPERATURE + 90 °C FLAME-RETARDANT IEC 60332-1-2 test for single insulated wire and cable IEC 60332-3-22 test for bunched wire and cables category A HALOGEN-FREE IEC 60754 series SMOKE EMISSION IEC 61034 series

M&GS Shipyard Maps Series showcase the capabilities of shipyards in Indonesia for servicing the international offshore and marine industry, featuring details such as facilities and their key products and services, as well as their respective operating capacity.